Inconel 718 Flat Bars Supplier & Exporter
Buy Inconel 718 Flat Bars, Inconel Alloy 718 Bar, Inconel UNS N07718 Flat Bars, Inconel Alloy 718 Flat Bars, 718 Inconel Flat Bars Supplier in India.
Inconel 718 ASTM B637 Flat Bars, ASTM B637 Inconel Alloy 718 Flat Bars, Inconel DIN 2.4668 Flat Bars, Alloy 718 Flats Supplier.
Nandishwar Steel is a known exporter, manufacturer and supplier of Inconel 718 Flat Bars in India and abroad. Alloy 718 Flat Bars (UNS N07718) are used in valves, fasteners, springs, mandrels, tubing hangers, well head completion equipment and blow out preventers, gas turbine engine parts, and more. They are also used for Liquid fuel rocket motor components. Other popular uses are high strength bolting, and down hole shafting. The Nickel 718 Flat Bars can be readily machined in either the annealed or the age-hardened condition. The annealed condition will provide a longer tool life to some extent. The age-hardened condition provides enhanced chip breaker tools or chip action and produces an improved finish. We offer the same to our customers in made-to-order specifications as per requirements.
What is the density of inconel 718 flat bars?
Inconel 718 flat bars are a type of steel used to produce high-quality flat bars. They are available in numerous sizes and shapes and can be used to create a wide range of products. The density of Inconel 718 flat bars is approximately 870 kg/m3 (1.8 g/cm3), which makes them incredibly lightweight but also very strong. The alloy has excellent resistance to corrosion and oxidation, making it ideal for applications where high performance is required at a low cost.
What are the advantages of INCONEL 718 flat bars?
INCONEL 718 flat bars are an excellent choice for any application. The main advantage of INCONEL 718 flat bars is that they are used in applications where a high strength-to-weight ratio is needed but where heat resistance is also essential. This property makes them ideal for use in structural applications such as shipbuilding, where high temperatures and harsh environments are not uncommon. Another significant advantage of INCONEL 718 flat bars is their corrosion resistance. Because they have a higher nickel content than other alloys, they are more resistant to corrosion than most other alloys.
Specifications:
Standards: EN, DIN, JIS, ASTM, BS, ASME, AISI
Size: 5 mm To 500 mm Dia
Length : 100 mm To 3000 mm Long & Above
Specifications : ASTM B637 / SB637
Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.
Finish : Bright, Polish & Black
Inconel 718 Flat Bars Equivalent Grades
| STANDARD |
UNS |
WERKSTOFF NR. |
| Inconel 718 |
N07718 |
2.4668 |
Inconel 718 Chemical Composition Of Flats
| Element |
Percentage |
| Carbon |
0.08 max |
| Manganese |
0.35 max |
| Phosphorus |
0.015 max |
| Sulfur |
0.015 max |
| Silicon |
0.35 max |
| Chromium |
17-21 |
| Nickel |
50-55 |
| Molybdenum |
2.80-3.30 |
| Columbium |
4.75-5.50 |
| Titanium |
0.65-1.15 |
| Aluminum |
0.20-0.80 |
| Cobalt |
1.00 max |
| Boron |
0.006 max |
| Copper |
0.30 max |
| Tantalum |
0.05 max |
| Iron |
Balance |
Inconel 718 Mechanical Properties For Flat Bar
|
Yield Strength
Min (0.2% offset) |
Min |
Elongation
(% in 2") |
| Sheet and strip |
80,000 psi (550 MPa) |
140,000 psi (965 MPa) |
30 (min) |
| Plate |
105,000 psi (725 MPa) |
150,000 psi (1,035 MPa) |
30 (min) |
Other grades of Inconel 718 Flat Bars
| Inconel 718 Flat Bar |
| ASTM B637 Alloy 718 Flat Bars |
| Inconel Alloy 718 Flat Bar |
| Inconel Alloy UNS N07718 Flat Bar |
| 718 Inconel Alloy Flat Bars |
| Inconel DIN 2.4668 Flat Bar |
| Alloy 718 Flat Bars |
| 718 Inconel Alloy Flats Suppliers |
| Inconel 718 Flat Bars Exporter |
