Incoloy 825 Round Bars Supplier & Exporter


Incoloy 825 Round Bars

ASTM B425 UNS N08825 Incoloy Round Bars, Incoloy 825 Bar, Incoloy 825 Forged Round Bar, Incoloy DIN 2.4858 Bright Bars, 825 Incoloy Rectangle Bar Supplier in India.


ASTM B425 Incoloy 825 Hex Bars, Incoloy UNS N08825 Square Bars, Alloy 825 Rods, Incoloy 825 Hot Rolled Round Bar Supplier

Nandishwar Steel reckoned as prominent supplier, exporter and manufacturer of Incoloy 825 Round Bars amongst our patrons. These Incoloy 825 Rods (UNS N08825) are often used in Chemical Processing, Pollution-control, Oil and gas well piping, nuclear fuel reprocessing, and more. Alloy 825 Round Bars are also used in phosphoric acid evaporators; pickling-tank heater, pickling hooks and equipment; chemical process equipment; tank trucks; propeller shafts, and spent nuclear fuel element recovery. Our Alloy 825 Rods is good conductor of electricity is also used for many electrical purposes. These Nickel 825 Rods resists intergranular corrosion in the as-welded condition. Nickel 825 Round Bars has high level of resistance to variety of oxidizing substances such as nitric acid, nitrates, and oxidizing salt. We also offer our patrons a wide range of this product in custom-built sizes and shapes.

What are the typical sizes of Incoloy 825 bars?

Incoloy 825 bars come in various sizes to meet specific manufacturing needs. The bars can have diameters ranging from as small as 1/16 inch up to 6 inches, with some custom, sizes larger than 6 inches available upon request. The thickness of these bars can range from 1/4 inch thick for smaller diameters to 16 inches in diameter for thicker bars. Different lengths are available depending on the use, ranging from 8 to 20 feet. Incoloy 825 bars provide excellent strength and corrosion resistance in many uses, and their versatile sizing makes them well-suited for any application.

Specifications:

Standards : EN, DIN, JIS, ASTM, BS, ASME, AISI

Size : 5 mm To 500 mm Dia in

Length : 100 mm To 3000 mm Long & Above

Specifications : ASTM B425 / SB425

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Finish : Bright, Polish & Black


Incoloy 825 Equivalent Material Grades For Rods

STANDARD UNS WERKSTOFF NR. GOST BS OR EN JIS AFNOR
Incoloy 825 N08825 2.4858 ЭП703 NA 16 XH38BT NiCr21Mo NCF 825 NFE30C20DUM

Other grades of Incoloy 825 Round Bars

Grade Ni Cr Fe Mb Ti Cu Mn C S Al Si
Incoloy 825 38.0 – 46.0 19.5 – 23.5 22.0 min 2.5 – 3.5 0.6 – 1.2 1.5 – 3.0 1.0 max 0.05 max 0.03 max 0.2 max 0.5 max

 

Other grades of Incoloy 825 Round Bars

Incoloy 825 Round Bars
ASTM B425 Alloy 825 Bars
Incoloy 825 Rods
Incoloy UNS N08825 Bright Bar
825 Incoloy Hex Bar
Incoloy DIN 2.4858 Hot Rolled Round Bar
Incoloy 825 Forged Round Bars Suppliers
825 Incoloy Cold Drawn Bars Exporter

 

Products Range