Nickel Alloy 200 Fasteners Supplier & Exporter


Nickel Alloy 200 Fasteners

 

Nickel Alloy 200 Industrial Fasteners, Nickel Alloy 200 Fasteners, High Quality Nickel 200 Fasteners, Nickel Alloy 200 Nuts, Dimensions of ASME B18.2.1 Alloy 200 Heavy Hex Bolt, Nickel Alloy 200 Screw, Nickel Alloy 200 Stud, Nickel 200 Washer, Nickel 200 Bolts Supplier in Mumbai, India.


Nickel UNS N02200 Fastener, Alloy DIN 2.4066 Fasteners, Nickel Alloy 200 Hex Nuts, High Nickel Alloy 200 Square Washers, JIS NW 2200 Fasteners, 200 Nickel Alloy Half and Full Threaded Stud Bolts Stockist, Nickel 200 J / U Bolts, Nickel Alloy 200 Coupling Nuts, High Nickel 200 Flat Washer Stockholder, 200 Nickel Alloy Head Cap Screws Exporter In India.

Nandishwar Steel is a most acclaimed Nickel Alloy 200 Fasteners manufacturer, supplier, and exporter in India. Whether you are looking for odd size fasteners, it only places you get as per your application requirement. Here we also take special orders for specific requirements made by the customers. For the general purpose applications, we also store these fasteners in various standards, designations, specifications and custom dimensions. We are accredited as ISO certified company as we produce products according to the set industrial norms.

The offered range of fasteners is known for its compatibility against adverse environments. The grade defines the higher strength and toughness even in the terms of impact applications.

Where Nickel Alloy 200 Fasteners used for?
These fasteners are used for temporary connection of two elements. The joint is made without any damages of external elements; also the disassembling is quite easier. These fasteners make non-permanent joints with higher toughness. It is used for severe applications where pressures should be kept minimum without any leakages.

Grade truthfulness:
Nickel 200 is commercial pure wrought nickel having UNS N02200 designation. It has excellent mechanical constants and excellent resistivity to a wide range of adverse environments. It has many properties ideal for industrial applications such as magnetic properties, low gas content and high thermal conductivities, and low vapor pressure.

It has a good composition of alloying elements makes it resistance to a wide range of adverse environments. This grade has a good ability to handle most severe chemicals and also utilized in the terms of organic and inorganic compounds.

Tests performed on the fasteners:
The main one is fatigue test, flexure test, wedge tensile strength, radiographic test, flaring test, creep test, pitting corrosion test, positive material test, compression test, ultrasonic test, and proof load test. Other tests named axial tensile test, torsion test, drop weight test, mechanical test, hardness test, tensile test, micro test, macro test, chemical analysis, intergranular corrosion test, etc.

Packaging:
These fasteners are delivered in the casing of plywood boxes, cartons, pallets or woven bags. These are individually wrapped in the thin film of plastic that prevents any type of external damages while shipping.


Specifications:

Standard : DIN, ASTM, BS and all International Standards

Size : 3 mm to 200 mm

Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes

Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes

Washers Size : M1 - M64 | #4 to 3" | Custom Sizes

Length : M02 to M33

Types : Nuts, Bolts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U-Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.


Nickel Alloy 200 Fasteners Equivalent Grades

STANDARD WERKSTOFF NR. UNS JIS BS GOST AFNOR EN
Nickel Alloy 200 2.4066 N02200 NW 2200 NA 11 НП-2 N-100M Ni 99.2

Alloy 200 Fastener Chemical Composition

Grade C Mn Si S Cu Fe Ni
Nickel Alloy 200 0.15 max 0.35 max 0.35 max 0.01 max 0.25 max 0.40 max 99.0 min

Nickel Alloy 200 Fasteners Mechanical Properties

Element Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
Nickel Alloy 200 8.9 g/cm3 1446 °C (2635 °F) Psi – 67000 , MPa – 462 Psi – 21500 , MPa – 148 45 %


Other grades of Nickel Alloy 200 Fasteners

»  Nickel Alloy 200 Nuts
»  Nickel 200 Bolts
»  Alloy 200 Screw
»  High Nickel Alloy 200 Washer
»  Nickel Alloy 200 Studs
»  Nickel Alloy 200 Square Nut
»  Nickel Alloy N02200 Fastener
»  Nickel Alloy 2.4066 Fasteners Stockist
»  200 Nickel Alloy Machine Screw
»  Nickel Alloy 200 Socket Head Cap Screw
»  Nickel Alloy 200 Wing Screw Supplier
»  Nickel 200 Coupling Nuts
»  Alloy 200 Allen Cap Screw Wholesaler
»  Nickel 200 Split Lock Washers

»   Nickel Alloy 200 Industrial Fasteners
»  200 Nickel Alloy T-Head Bolts Manufacturer
»  Nickel 200 Eye Bolt Exporter
»   Nickel Alloy 200 Hex Nuts
»  Nickel Alloy 200 Cap Nuts
»  200 High Nickel Alloy Ogee Washers
»  Nickel 200 Slotted Nuts
»  Alloy 200 U Bolts
»  200 Nickel Cap Screw Suppliers
»  Nickel Alloy 200 Socket Hexagon Head Screw
»  High Nickel Alloy 200 Pan Head Screw
»  200 Nickel Alloy T-Head Bolts
»  200 Nickel Stud Bolts
»  Nickel Alloy 200 Machine Screws

Products Range