We owned a position of prominent exporter, supplier and manufacturer of Titanium Gr 2 Circle & Titanium Gr 5 Circle amongst our patrons. Titanium Gr 2 Rings are used for Heat exchangers, condenser tubing and bleaching plants in paper industry, offshore oil installation water pipe lines. Hot forming here will reduce both the springback and required forming forces, and will increase the overall ductility of the material. Titanium Gr 5 Rings in the manufacture of airframe structural components and skin, aircraft hydraulic systems, air engine components, rockets, missiles, and spacecraft, where these properties are invaluable. The strength and hardness of this mill-annealed product may be increased by approximately 20 percent after an aging heat treatment. Nandishwar Steel also offers these products in personalized specifications.
Titanium grade 2 is a highly durable material that is frequently used in a variety of industrial applications. Its strength-to-weight ratio and resistance to corrosion make it an excellent choice for use in harsh environments, such as high temperatures and exposure to corrosive chemicals or seawater. However, the durability of titanium grade 2 rings in industrial applications can depend on the specific conditions of use. While it is generally very durable, it is important to ensure that the ring is designed and manufactured appropriately to withstand any potential impacts, pressures, or environmental factors.
Titanium grade 5 circles are an increasingly popular choice for numerous applications due to their excellent strength-to-weight ratio and their resistance to corrosion from various chemicals and environments. One notable benefit of titanium grade 5 circles is their ability to tolerate even higher temperatures than other titanium alloys. On the downside, titanium grade 5 circles are more expensive than similar alloys, and they can be more difficult to form into complex shapes than other materials. However, titanium’s overall performance advantages outweigh the cost concerns in many industrial applications.
Specifications:
Standards: EN, DIN, JIS, ASTM, BS, ASME, AISI
Rings Diameter: 3" OD up to 48" OD Up to 900 lbs max
Circle Diameter: 3" DIA up to 38" DIA 1500 lbs max
Specifications : ASTM B265, B381 / ASME SB265, B381 AMS 4911
Forms : Forging & Plate Cut
| STANDARD | UNS | WERKSTOFF NR. |
| Titanium Gr2 | R50400 | 3.7035 |
| Titanium Gr5 | N56400 | 3.7165 |
| Titanium Gr 2 Circles |
| ASTM B381 Grade 5 Rings |
| Titanium Alloy Gr 2 Circles |
| Titanium Alloy UNS R50400 Circles |
| Grade 5 Titanium Rings |
| Titanium DIN 3.7035 Rings |
| Grade 2 Titanium Circles |
| Titanium UNS N56400 Circles Suppliers |
| Titanium DIN 3.7165 Rings Exporter |
 |
|
Copyright © 2010 Nandishwar Steel. All rights reserved. Design & Promoted By www.rathinfotech.com
